Get the most out of your Windows 10 network and game performance. With these tweaks you can significantly reduce latency in multiple online games and online applications. Additionally it generally improves system performance as it relates to internet related activities.  You will need access to the administrator account or administrative privileges.

Windows 10 optimized features in the TCP/IP stack, including CTCP, and TCP Window Auto-Tuning. The new implementation works much better by default than previous Windows versions with broadband internet connections and is able to adjust many values on the automatically.

However, there is room for improvement and you can adjust some values to better meet your use of your system.

To enter some of the commands below, you will need to run “elevated” command prompt or “as administrator”.

To do this.

  1. Press and Hold the Windows Key, or type in CMD in Contra
  2. Right Click,
  3. Choose “Run As Administrator”

Check the TCP/IP state

To check the current status of the Vista TCP/IP tweakable parameters, in elevated command prompt type the following command:

netsh int tcp show global

The settings, as well as their default and recommended state are explained below. The two most important tweakable parameters are “Auto-Tuning Level” and “Congestion Control Provider”.

Disable TCP Auto-Tuning

At the command prompt type:

netsh int tcp set global autotuninglevel=disabled

Enable Compound TCP

At the command prompt type:

netsh int tcp set supplemental custom congestionprovider = ctcp

Enable ECN Capability

At the command prompt type:

netsh int tcp set global ecncapability=enabled

Enable Receive-side Scaling

At the command prompt type:

netsh int tcp set global rss=enabled

Enable TCP Chimney Offload

At the command prompty type:

netsh int tcp set global chimney=enabled

Setting

At the command prompt type:

netsh interface ipv4 show subinterface

This will display a list of interfaces, and their respective MTU values.

Change the MTUvalue of a specific network card, at the command prompt type:

netsh interface ipv4 set subinterface “some network interface name” mtu=#### store=persistent

Example, the name of the network card you want to change iis “Wireless Network Connection” and you want to set its MTU to 1500, at the command prompt type:

netsh interface ipv4 set subinterface “Wireless Network Connection” mtu=1500 store=persistent

Registry Tweaks

Note that for changes to these settings to take effect the computer needs to be rebooted.

Moderate understanding of the Windows Registry is needed.

As with everything on this site, You are responsible for your own actions. See Evilware.com Terms of Use

  1. Go to Start
  2. Run
  3. type: regedit
  4. Press Enter

while logged in as administrator), you can navigate and edit the following keys.

TCP 1323 Options

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
Tcp1323Opts=1 (DWORD, entry created automatically by Windows when you run the “netsh int tcp set global autotuninglvl=…” command, set to 0 by default).

Setting this seems to have no effect, since auto-tuning uses the TCP 1323 scale factor and changes it on the fly, disregarding this setting. Additional testing may be required to determine it’s the effect if auto-tuning is turned off. Setting it to 1 is best for cable & fiber connections.

NetDMA

NetDMA enables support for advanced direct memory access. In essence, it provides the ability to more efficiently move network data by minimizing CPU usage. NetDMA frees the CPU from handling memory data transfers between network card data buffers and application buffers by using a DMA engine.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
EnableTCPA=1 (DWORD, 1 to enable, 0 to disable NetDMA. Value not present by default in Windows 10)

Recommended setting is 1, a new DWORD value may need to be created if not already present in the registry.

DefaultTTL

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
DefaultTTL=64 (DWORD, set to a decimal value between 32 and 128. Recommended: 64)

TcpMaxDataRetransmissions

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
TCPMaxDataRetransmissions=7 (DWORD, recommended: between 3 and 10, default registry value 255, default 5 in documentation)

SynAttackProtect

This setting provides protection against SYN denial of service (DoS) attacks. When enabled, connections timeout sooner if SYN attack is detected. When set at 1, TCPMaxDataRetransmissions can be lowered further.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
SynAttackProtect=1 (DWORD, recommended: 1, not present in registry by default)

Set DNS and Hosts Priority

The setting can improve DNS and hostname resolution by increasing the priority of related services while keeping their order. Lower numbers mean higher process priority. The corresponding registry settings are as follows:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipServiceProvider
LocalPriority=4 (DWORD, recommended: 4, default: 499) – local names cache
HostsPriority=5 (DWORD, recommended: 5, default: 500) – the HOSTS file
DnsPriority=6 (DWORD, recommended: 6, default: 2000) – DNS
NetbtPriority=7 (DWORD, recommended: 7, default: 2001) – NetBT name resolution, including WINS

TcpTimedWaitDelay (port allocation)

Windows 10 improved upon some of the features in previous Windows versions, and are usually sufficient under normal load. In some inst

ances under heavy load it it may be necessary to adjust the settings to tweak the availability of user ports requested by an application. This is often the case with online games such as World of Warcraft.

The following registry values need to be edited:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
MaxUserPort=65535

Recommended: leave at default, or use a number above 16384 up to 65535, decimal value.  maximum number of ports to use. 1024 is automatically subtracted from entered value to allow for reserved ports under 1024.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters

TcpTimedWaitDelay=30

(DWORD Off in the registry by default Recommended: 30 decimal, denoting 30 seconds) – time to wait before reclaiming ports, in seconds. Default time before reclaiming ports, if value is at 0xffffffff or not present in the registry is 120 seconds. Just reducing the delay is often sufficient without changing MaxUserPort, as it allows for reusing ports more efficiently.

Ephemeral ports can be checked and changed using netsh as well.

To list the current values, in command prompt, type:
netsh int ipv4 show dynamicportrange tcp

To set both the starting, and max user port using netsh, in elevated command prompt type:
netsh int ipv4 set dynamicportrange protocol=tcp start=1025 num=64511 (start=NNN denoting the starting port, and num=NNN denoting the number of ports)

QoS Reserved Bandwidth

Windows 10 nework adapters have a “QoS Packet Scheduler” enabled by default, which reserves 20% of bandwidth by default for QoS enabled applications that request priority traffic.

Change this value to

HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindowsPsched
NonBestEffortLimit=0

In some cases you will need to Create a New Key Value of “Psched” in  HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows

Then create the DWord Value NonBestEffortLimit.

Gaming Tweak – Disable Nagle’s algorithm – Gaming Tweak

The tweak below allows for tweaking or disabling Nagle’s alogrithm. Disabling nagle allows for small packets to be transferred immediately without delay. Note that disabling Nagle’s algorithm is only recommended for some games, and it may have negative impact on file transfers such as Bit Torrent.

To implement this tweak, in the registry editor find:

This setting configures the maximum number of outstanding ACKs in Windows 10/ Windows 7/ Windows 8 / Windows Vista/2008/Windows 2012/Windows 2016/ Windows 2019:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersInterfaces{NIC-id}
There will be multiple NIC interfaces listed there, for example: {1660430C-B14A-4AC2-8F83-B653E83E8297}. Find the correct one with your IP address listed. Under this {NIC-id} key, create a new DWORD value:
TcpAckFrequency=1 (DWORD value, 1=disable, 2=default, 2-n=send ACKs if outstanding ACKs before timed interval. Setting not present by default).

For gaming performance, recommended is 1 (disable). For pure throughput and data streaming, you can experiment with values over 2.

Also, find the following key (if present):
HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSMQParameters

Add a new DWORD value:
TCPNoDelay=1 (DWORD value, 0 to enable Nagle’s algorithm, 1 to disable, not present by default)

Configure the ACK interval timeout (only has effect if nagling is enabled), find the following key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersInterfaces{NIC-id}
TcpDelAckTicks=0 (DWORD value, default=2, 0=disable nagling, 1-6=100-600 ms).

 

Note you can also set this to 1 to reduce the nagle effect from the default of 200ms without disabling it.